|
|
NQ 500 |
|
The NQ 500 is an outstanding air purification system.
The patented technology of this product confirms its uniqueness. It constantly produces purified and sanitized air, with a uniform optimization of air flow and air volume within the entire room.
Consisting of 3 levels of mechanical filtration as well as an ultraviolet purification zone that destroys bacteria, viruses, fungi and molds. Unit size and mobility make this equipment ideal for several applications such as commercial, medical, industrial or military settings
Efficacy proven in real conditions for over 10 years (references available on request).
The ultraviolet disinfection allows our units to offer a high protection without utilising any chemicals or added materials. | | | General features:
- High efficiency 99.97% HEPA
- Mobile, quickly deployed
- Autonomous
- Positive or negative pressure possible
- System utilising recognised processes
- Low Maintenance
- Fraction of the cost of permanent isolation room
The NQ500 purifies air with 2 recognized processes:
FILTRATION – Three stages of mechanical filtration :
- 2 Pre-filters of 51 and 102 mm - 25-30% - G4
- HEPA filter ASHRAE- H13 (99.97% at 0.3 µm) - DOP
UV DISINFECTION - Three germicidal UV lamps providing a total UV dosage of 46,480 µW sec/cm² | |  |
Working principle:
A Complete mixing pattern is created as a 1.94 m height unit sends clean air to the upper part of the room, forcing heavier particles and droplet nuclei down away from breathing zone and into unit’s inlet.
Details:
- The air is recirculated into the bottom part of the machine
- Larger particles are trapped into the 2 stages of the pre-filters (25-30% ASHRAE) that are constantly bathed by UV lamps
- The air then passes through the UVGI (UV germicidal irradiation) chamber, a highly effective germicide, that destroys virus, bacteria, fungi and molds
- Finally 99.97% of particles and micro-organisms > 0.3 µm are filtered by the HEPA filter H13. As the filter traps only micro-organisms that have been destroyed by UVC’s, there is no risk of replication in case of the unit is switched off
- Purified air is discharged, in the top part of the unit, via a discharge system specially designed (“Upflow”) to maximise and optimise the room effective air change rate
| | 
|
| Technical features | | Height | 78’’ - 1940 mm | | Width | 26’’ - 660 mm | | Depth | 13’’ - 330 mm | | Weight | 184 lbs - 83.5 kg | | Power supply | 115 V - 60 Hz / 230 V - 50 Hz | | Power | 437 Watts (high speed) | | Air volume | 500 cfm - 236 l/s - 850 m³/h | | Noise Level | 55 dBA - (high speed) | | Hour meter | Up to 99,999 hours | | Pressure gauge | 0 to 1 inches WC - 250 Pa | | Pre-filter 1 | 2“- 51 mm / 30% ASHRAE - G4* | | Pre-filter 2 | 4“- 102 mm / 30% ASHRAE - G4* | | HEPA filter | 12’’ - 305 mm - H13** - ASHRE - DOP - 99,97% > 0.3 µm | | UV zone | 3 lamps of 36’’ - 915 mm | | UV dosage | 46,480 µWsec/cm² |
* According to EN 779 **According to EN 1822
| |
| Maintenance required | | Pre-filters | 3 months for 2’’ - 51 mm pre-filter
6 months for 4’’ - 102 mm pre-filter | | HEPA filter | 24 months max. (18 months recommended) | | UVGI lamps | Every 9,000 hours |
Options: - Inlet plenum to create positive pressure within the room
- Negative pressure top to create negative or positive pressure
- Activated carbon installed instead of UV lamps or instead of the 2nd G4 Pre-filter to suit specific applications
- Photocatalysis arrangement NQ 500 Medical brochure US download NQ 500 Medical brochure EU download
NQ 500 technical data sheet download |
|
|
|
